Tuesday, 19 April 2016

Week 21

18/04/2016-24/04/2016
Submission Week BA1b
Summary:

As this was submission week, I have spent the week finishing off work, fleshing out my reflective journal and documenting all my work from the workshops and my studio work. I therefore have presented every outcome I've made for this unit below.


Piece no#1, Untitled
Modelling wax sculpture. During a seminar at the start of the sculpture workshop, we were each handed a piece of modelling wax (roughly W 3cm, H 2cm, D 1cm), which we were told to mould without considering what we were doing.
 
Piece no#2, untitled
Aluminium cast of a key ring. My first attempt at a simple sand mould cast. Originally I kept the excess material from the funnel, however the majority of this broke off in following weeks. I wanted to keep it as this was a physical representation of the negative space.
 
Piece No#3, untitled
Plaster cast of my hand. Due to the limited amount of alginate available in the workshop I was only able to cast a limited amount of my hand, therefore I clenched a fist and splayed out my fingers, maximising the potential cast on a limited amount of materials.
 
Piece No#4, Untitled
Plaster cast of my palm. With the leftover plaster from the hand above, I chose to cast the negative space of my palm.
 
Piece No#5, Untitled
Steel sphere. For the second sculpture workshop, working in cooperation with three other students we created a sphere from 1 metre diameter 6mm steel bar circles. This is still a work in progress.

Piece No#6, untitled
Plaster cube. Part 3 of the sculpture workshop, we were each given a cube of plaster approximately 20cm3. Which I hollowed out and refilled the empty space with the off cuts.

Piece No#7, untitled
Mask creation 1. (Mod roc, plastacine and cotton) In response to my research into Mathew Barneys work I began creating masks to reflect my own themes of internal demons, or the beast in men. This was more of a trial piece which I expanded upon in the next two pieces.

Piece No#8, Untitled
Mask creation 2. (Mod Roc, plastacine and string) I tried to link both a beast like face with a humane one, I covered the eyes and stitched the mouth so as to create a sinister and harmful presence linking to the human capacity for violence.

Piece No#9, Untitled
Mask Creation 3. (Mod roc, plastacine and string) This is very similar to mask 2, except rather than linking the capacity for violence to beasts and animalistic human characteristics, I chose to make a link to morality by exposing details of an exoskeleton.
Piece No#10, Untitled
Brick and Wax. This is a response to the sculpture workshop prompt appropriation I took a standard red brick and decided to change this by considering my own themes, therefore I decided to change its form. When I consider a brick I think it resembles a sturdy form, a figure of durability, therefore I wanted to maintain a similar shape yet completely alter this interpretation. So I decided to shatter the brick with a hammer and then rescuer the sections with a very brittle material, I chose to use wax as it can change state depending on shifts in temperature.
Piece No#11, Untitled
Study of a scene of purple objects within an hour, part of the painting workshop part 1, on an A4 primed wooden board, in acrylic paint.

Piece No#12, Untitled
Study of a scene of yellow objects within an hour, part of the painting workshop part 1, on an A3 primed wooden board, in acrylic paint.

Piece No#13, Untitled
Study of a yellow scarf in an expressive style in acrylic paint on an A4 primed wooden board.

Piece No#14, Untitled
Abstract experimental piece 1, acrylic painting on an A2 sheet of card.
 
Piece No#15, Untitled
Abstract experimental piece 2, acrylic painting on an A2 sheet of card.
 
Piece No#16, Untitled
Abstract experimental piece 3, acrylic painting on an A2 sheet of card.
 
Piece No#17, Untitled
Abstract experimental piece 4, acrylic painting on an A2 sheet of card.
 
Piece No#18, Untitled
Abstract experimental piece 5, acrylic painting on an A2 sheet of card.
 
Piece No#19, Untitled
Abstract experimental piece 6, acrylic painting on an A2 sheet of card.
 
Piece No#20, Untitled
Abstract experimental piece 7, acrylic painting on 2x A2 sheets of calico.

Piece No#21, Untitled
Response to painting workshop 10 rules, rule 1: A painting visibly including letters, words, numbers or instructions. Studio wall painting used to convey my own themes, acrylic paint.
 
Piece No#22, Untitled
Response to painting workshop 10 rules, rule 1: A painting visibly including letters, words, numbers or instructions. A5 unprimed wooden board painting used to convey my own themes, acrylic paint.
 
Piece No#23, Untitled
Response to painting workshop 10 rules, rule 2: A painting that is ephemeral. I painted these letters using acrylic ink onto an A1 sheet of mount board which I screw to a wooden palette before covering the text in bird feed. This is the weathered remainder of the piece of work once the bird feed was completely gone.
 
Piece No#24, Untitled
Response to painting workshop 10 rules, rule 3: A painting made on a non-art surface (not canvas, fine art paper r new wood). Expressive acrylic painting on a broken A3 lightbox.
 Piece No#25, Untitled
Response to painting workshop 10 rules, rule 4: A painting featuring more than one visual language or style. A1 sheet of mount board, two separate acrylic paintings, one of the skull in a realistic detailed style, the other an expressive style face above.

 
Piece No#26, “Cast Aside”
Response to painting workshop 10 rules, rule 5: A painting of an ending. High detail acrylic A1 painting of a roadkill badger.
 
Piece No#27, Untitled
Response to painting workshop 10 rules, rule 6: A painting consisting of two or more separate components or surfaces. Using an A1 chipboard canvas I made a large version of the A5 text painting above which I painted on an A1 transparent acrylic board in a similar style to my lightbox painting.
 
Piece No#28, Untitled
Response to painting workshop 10 rules, rule 7: A painting with a glitch (interference, disruption, interruption.) A1 mount board painted with airbrush in red acrylic paint, with the glitch of a strip of masking tape across the centre of the board.
 Piece No#29, Untitled
Response to painting workshop 10 rules, rule 8: A painting made using one or more non-art substance as paint or with at least one object attached to it. Based on my theme of hybrid forms, I’ve made a simple A4 painting using coffee of an animal I’ve created in my sketchbook, in the style of a cave painting.
 
Piece No#30, Untitled
Response to painting workshop 10 rules, rule 9: A painting made with pressure. For this I took an A3 canvas bard which I crushed up into a ball and poured watered down acrylic paint inside of the cracks allowing the creases to dictate how the painting would turn out.
 
Piece No#31, Untitled
Response to painting workshop 10 rules, rule 10: A painting in which the frame or framing device plays an integral role and is non-rectangular. I hung a sheet of bubble wrap from the studio ceiling using string I then poured acrylic ink over the contours.

Piece No#32, Untitled
Roadkill form model. As a way to develop my work from the detailed painting of the roadkill badger, I’ve made a plaster model of the badgers form.
 
Piece No#33, Untitled
Animal head sculpture. As a way to convey my themes of the human capacity for violence, and forms, by combining the anatomy of a horse head and wolf’s both of which have had links to human conflict for centuries. The sculpture consists of foam board, plastacine and mod roc.
 
Piece No#34, Untitled
In the first part of the advanced sculpture workshop, I used the everyday plastic materials to create a serpent like form, approximately 2.5, metres long. (Plastic dust sheet, parcel tape, cable ties.)
 
Piece No#35, Untitled
Plastic based animal sculpture. As a development from my work in the advanced sculpture workshop, I’ve primarily used every day plastic materials to create a decaying serpent like animal form linking to my own themes. The sculpture consists of foam board, duct tape, chicken wire, plastic bags, and disposable dust sheet.
 
Piece No#36, Untitled
Response to sculpture workshop prompt cloak and veil, here I was experimenting with form by filling tights with rice to create a decaying organ like form which I used to cloak small shrubs and branches.

Piece No#37, Untitled
Vacuum form 1. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No#38, Untitled
Vacuum form 2. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No#39, Untitled
Vacuum form 3. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No#40, Untitled
Vacuum form 4. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No#41, Untitled
Vacuum form 5. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No#42, Untitled
Vacuum form 6. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No# 43, Untitled
Vacuum form 7. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No# 44, Untitled
Vacuum form 8. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No# 45, Untitled
Vacuum form 9. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.
 
Piece No# 46, Untitled
Vacuum form 10. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.

Piece No# 47, Untitled
Vacuum form 11. As part of the second week of the advanced sculpture workshop I created a series of vacuum formed plastic forms by vacuuming an assortment of discarded or abandoned rags.

Piece No# 48, Untitled
Bin bag form. During the third part of the advanced sculpture workshop I experimented further with adapting household plastic materials into animal forms, therefore I blew up several bin bags into oval like shapes which I tied together using cable ties. This resulted in a form similar to a sea urchin. I therefore attached foam spines.

Piece No# 49, Untitled
Hybrid drawing. On A1 mount board using pencil and inks I’ve drawn a large scale version of one of my animal creations from my sketchbook, conveying the theme of the human capacity for violence, I tried to draw this quickly and expressively.




1st Year Exhibition
Student Gallery Exhibition. For the end of year exhibition I chose to primarily link to how I’ve combined my themes of animal forms to the human capacity for violence. Therefore I chose to exhibit two pieces, number 26 and 33.